Anything to do with Fender, Burns and other guitars; also amps, effects units including eTap, plus any other music making accessories
Moderators: David Martin, dave robinson, Iain Purdon, George Geddes
by Bill Bowley » Mon Nov 16, 2009 1:57 pm
Has anyone used or is using such a combination? I would be very interested and thankful for any information or advice on such a set up, as I am about to take possession of a Quadraverb GT and have a spare FCB1010 sitting around......
-
Bill Bowley
-
by StuartD » Mon Nov 16, 2009 3:52 pm
HI Bill
Whilst I haven't used one with an Alessis, I did contact Charlie Hall when i felt i needed a Foot Pedal for my Q20 - becaue of fading eyesight!! I suggested buying one of those and he said it would be fine but it was a 'too good' for what I wanted it to do and suggested I bought a cheaper Midi Pedal, which I did. So i would assume it would be OK.
Regards
Stuart
-
StuartD
-
- Posts: 562
- Joined: Wed Sep 16, 2009 9:21 am
- Full Real Name: Stuart Duffy
by David Martin » Mon Nov 16, 2009 4:05 pm
Good to see you here, Bill... welcome.
David M
-
David Martin
- Site Admin
-
- Posts: 1868
- Joined: Tue Sep 08, 2009 4:48 pm
- Location: Lincoln
- Full Real Name: David Martin
-
by Bill Bowley » Mon Nov 16, 2009 10:40 pm
David,
Many thanks for the warm welcome!
Stuart,
Thanks for the advice! I would think coming from Charlie and through you it is definitely of value!
-
Bill Bowley
-
by KenE » Mon Nov 30, 2009 6:11 pm
Bill
Have you got the kit and connected the FCB1010 to the Quadraverb?
If so, can you share the results? I have the kit and would like to do the same.
Thanks
Ken E
-
KenE
-
by Bill Bowley » Mon Nov 30, 2009 10:51 pm
Ken,
Sorry mate, progress has been a bit slow in that department of late! I've just taken delivery of a Samson Powerbrite Pro 10 unit and I'm in the (slow) process of rebuilding my 'rack' to accomodate that at the moment. I have got the FCB1010 'out of storage' at least, so that's a start -I'll post a progress report on this thread once I get some results!
-
Bill Bowley
-
by Bill Bowley » Tue Dec 01, 2009 5:31 am
Ken,
Hooked up and working in direct mode to select the patches, have yet to sort out the 'pedals', I'll see how it goes controlling the pre-amp volume at first.
Regards
-
Bill Bowley
-
by KenE » Tue Dec 01, 2009 10:28 am
Thanks, Bill. Looks like I am running out of excuses not to try it myself!
-
KenE
-
Return to Gear
Who is online
Users browsing this forum: No registered users and 75 guests