£1 LED bar.

[ecca]

Here's a 5 LED bar to illuminate your eTap2hws from Poundland.
Cut the plug off,pull the waggly chrome tube off the light itself and the wires will pull up the tube.
It is a 5 volt device so a resistor will be required or run 2 of them in series.

http://www.poundland.co.uk/product-range/a-z/usb-plug-in-5-led-light/

[David Martin]

An excellent find!

[kipper]

yes thanks for shedding some light on the subject of lighting an etap peter

[Derek Misselbrook]

Hi Ecca what a great little light, can you enlarge on how you would use one , and how to wire it up.........Also where did you get the knobs that will light up from this?...Thanks in advance

[ecca]

You would glue it underneath the hangover at the front of the Eccamatic as did David Martin when he did his light.
It would require a resistor to run one directly from the incoming 12volt supply,
But you could wire 2 in series to run it without.

[Tomlinson]

Thanks Ecca,

Being Hopeless At Electronics,as I am, I 'll just try Using it as a Stand alone ,USB plugin.
With a USB extension Cable.
It's Another Great Idea from You.
Cheers

Ian.