Anything to do with Fender, Burns and other guitars; also amps, effects units including eTap, plus any other music making accessories
Moderators: David Martin, Iain Purdon, George Geddes, JimN, dave robinson
by Vincent » 11 Mar 2011, 10:44
Does anyone out there know why the clean channel on a Cambridge reverb 30 would distort?
In fact both the channels on mine have broken up. I think the problem is that they dont take kindly to being played at full whack too often. I wonder what component is responsible. tremolo is also gone. In good nick these sounded very good. Good tone-better I would say than Valve Reactor.
Vincent
-
Vincent
-
- Posts: 70
- Joined: 02 Mar 2011, 15:19
by Didier » 11 Mar 2011, 15:21
-
Didier
-
- Posts: 1935
- Joined: 15 Sep 2009, 10:57
- Location: West suburb of Paris, France
-
by panchodiaz » 11 Mar 2011, 16:27
Hi,
My Cambridge has the same symptons. It distorts in both channels. I thought it could need a new valve (it uses a ECC83 in the preamp in Channel 2) but the fact that It also distorts in the clean (transistor) channel indicates that maybe the cause may be different.
Didier, my Cambridge had the optocoupler problem solved from the factory but it´s possible that the new one would be deteriorated too.
-
panchodiaz
-
- Posts: 171
- Joined: 16 Sep 2009, 15:58
- Location: Sevilla, Spain
by Didier » 12 Mar 2011, 10:40
panchodiaz wrote:Didier, my Cambridge had the optocoupler problem solved from the factory but it´s possible that the new one would be deteriorated too.
If it was replaced by the factory, may be that they used a component from the same supplier than the original one...
The one indicated by Jimbo is from another supplier, and supposed to be much more reliable.
Didier
-
Didier
-
- Posts: 1935
- Joined: 15 Sep 2009, 10:57
- Location: West suburb of Paris, France
-
Return to Gear
Who is online
Users browsing this forum: No registered users and 49 guests