EUREKA !! -- I found exact eTap2hw setting for Flingle Bunt!
Posted: 07 Jun 2014, 00:03Tonight as I was watching the "Just Hank Marvin" video on YouTube when Hank was demonstrating his echo for Flingel Bunt, I realized that the echo setting I had been using was nowhere near Hank's echo. My setting was a Vox Long Tom emulation: program 4 . . . level 3 . . . mode B . . . and repeat 3 . . . and as far as I have seen, most of the other eTap2hw users used a similar echo setting.
I tried all the Vox Long Tom combinations and finally ruled them all out. Then I went through all the Echomatic II settings and still nothing. Then I thought, Hank could not have used the earlier echoes for Flingle Bunt and the only remaining option was program 6 -- the Roland 301 !! And surely enough, that was it !! I found that the best setting was 6 4 E 4.
Try it !! Set your eTap2hw to 6 ... 4 ... E ... 4 ...
and then go to http://www.youtube.com/watch?v=0kaVxgey9w4 and listen (13'44") and try it. It's exactly the same !!!
Regards,
Bojan
I tried all the Vox Long Tom combinations and finally ruled them all out. Then I went through all the Echomatic II settings and still nothing. Then I thought, Hank could not have used the earlier echoes for Flingle Bunt and the only remaining option was program 6 -- the Roland 301 !! And surely enough, that was it !! I found that the best setting was 6 4 E 4.
Try it !! Set your eTap2hw to 6 ... 4 ... E ... 4 ...
and then go to http://www.youtube.com/watch?v=0kaVxgey9w4 and listen (13'44") and try it. It's exactly the same !!!
Regards,
Bojan