Page 1 of 2

12vac power supply for Valve Eccamatics.....

PostPosted: 20 Jun 2013, 19:09
by ecca
There's a cheaper 12 volt AC power supply than Maplins at RS.

http://uk.rs-online.com/web/p/plug-in-power-supply/0458923/

Re: 12vac power supply for Valve Eccamatics.....

PostPosted: 21 Jun 2013, 18:44
by RogerCook

Re: 12vac power supply for Valve Eccamatics.....

PostPosted: 21 Jun 2013, 18:48
by ecca
Not good Rog, it's DC, also requires at least 1 amp.

Re: 12vac power supply for Valve Eccamatics.....

PostPosted: 21 Jun 2013, 18:55
by RogerCook
Oh ^&%%*$**!! Didn't read yor post properly. I've used one for the non valve Etap

Re: 12vac power supply for Valve Eccamatics.....

PostPosted: 21 Jun 2013, 20:43
by Twang46
If you look around the boot sales/flea markets & that there's loads of power supplies from xmas trees & lights that are ac 12v output.......................... best of all they are usually 50p or 3 for a £ 8-)

Dick.

Re: 12vac power supply for Valve Eccamatics.....

PostPosted: 22 Jun 2013, 07:13
by ecca
That's my choice as well Dick, I'm always looking.

Re: 12vac power supply for Valve Eccamatics.....

PostPosted: 22 Jun 2013, 10:42
by keithmantle
Maplins N58AT is still cheaper at £15.99, you have to pay vat+£4.95 pp making total of £16.32 for Ecc's alternative

Re: 12vac power supply for Valve Eccamatics.....

PostPosted: 22 Jun 2013, 14:20
by ecca
Trust me, the bloody thing is now obsolete, I swear it wasn't yesterday, there is a replacement though.

http://uk.rs-online.com/web/p/plug-in-power-supply/7300237/

Keith, you can always fetch it from RS and pay no delivery charge.

Also, this power supply has only one 2.1/5.5mm connector and not a collection of various sized connectors that are turning out to be problematical.

Re: 12vac power supply for Valve Eccamatics.....

PostPosted: 28 Jun 2013, 10:14
by Nick Allan
Ecca,

Interesting that you mention problems with the power tips on the original power supply - mine seem to be very loose - but also they do not go as far in to the unit as the old one did, so I wondered if there were problems with the socket - or does it not matter ?

Also, the replacement power supply you mention is not in stock at the moment. Anyone know a good one that is available now?

All the best,

Nick

Re: 12vac power supply for Valve Eccamatics.....

PostPosted: 28 Jun 2013, 10:26
by keithmantle
Hi Nick, look further down page and it shows an alternative, £16.23 inc vat/pp its only got one tip and is secure, unfortunately mine has a 'buzz' a quick phone call and they are sending a new one, its a AD4830-12.0-1600 uk. Just checked the alternative is out of stock as well but Brian at RS said they will be in stock in 2 weeks.