The ShadowMusic Web Community

Here's a 5 LED bar to illuminate your eTap2hws from Poundland.
Cut the plug off,pull the waggly chrome tube off the light itself and the wires will pull up the tube.
It is a 5 volt device so a resistor will be required or run 2 of them in series.

http://www.poundland.co.uk/product-range/a-z/usb-plug-in-5-led-light/

An excellent find!

yes thanks for shedding some light on the subject of lighting an etap peter

Hi Ecca what a great little light, can you enlarge on how you would use one , and how to wire it up.........Also where did you get the knobs that will light up from this?...Thanks in advance

You would glue it underneath the hangover at the front of the Eccamatic as did David Martin when he did his light.
It would require a resistor to run one directly from the incoming 12volt supply,
But you could wire 2 in series to run it without.

Thanks Ecca,

Being Hopeless At Electronics,as I am, I 'll just try Using it as a Stand alone ,USB plugin.
With a USB extension Cable.
It's Another Great Idea from You.
Cheers

Ian.