Re: Latest development from me.......
Posted: 23 Jun 2014, 07:28
I have one more PCB enroute from China at the moment that combines the 2 PCBs that I did a couple of months back that should make everything just about as neat as I can. There will be this master PCB to the right of the enclosure which mounts using the 3 potentiometers and 2 screws to the rear on spacers. Under this hangs the Arduino and on top fits the FV1 module.
This connects with the LCD board using the 8 way IDC connector lead.
The current bane of my life is the front nameplate. The local place I've been using seem to have got ridiculously expensive and are currently quoting me me £37 for them which is out of the question. The other place I have used which is known to my pals in Northern Ireland don't seem to be very responsive to my emails so I'm never quite sure what's going on although their prices are much more reasonable.
I'm currently looking at vinyl labels and would appreciate any advice on this.
This connects with the LCD board using the 8 way IDC connector lead.
The current bane of my life is the front nameplate. The local place I've been using seem to have got ridiculously expensive and are currently quoting me me £37 for them which is out of the question. The other place I have used which is known to my pals in Northern Ireland don't seem to be very responsive to my emails so I'm never quite sure what's going on although their prices are much more reasonable.
I'm currently looking at vinyl labels and would appreciate any advice on this.