Page 1 of 1

Behringer FCB1010 with an Alesis Quadraverb GT?

PostPosted: Mon Nov 16, 2009 1:57 pm
by Bill Bowley
Has anyone used or is using such a combination? I would be very interested and thankful for any information or advice on such a set up, as I am about to take possession of a Quadraverb GT and have a spare FCB1010 sitting around......

;)

Re: Behringer FCB1010 with an Alesis Quadraverb GT?

PostPosted: Mon Nov 16, 2009 3:52 pm
by StuartD
HI Bill

Whilst I haven't used one with an Alessis, I did contact Charlie Hall when i felt i needed a Foot Pedal for my Q20 - becaue of fading eyesight!! I suggested buying one of those and he said it would be fine but it was a 'too good' for what I wanted it to do and suggested I bought a cheaper Midi Pedal, which I did. So i would assume it would be OK.

Regards

Stuart

Re: Behringer FCB1010 with an Alesis Quadraverb GT?

PostPosted: Mon Nov 16, 2009 4:05 pm
by David Martin
Good to see you here, Bill... welcome. :thumbup:

Re: Behringer FCB1010 with an Alesis Quadraverb GT?

PostPosted: Mon Nov 16, 2009 10:40 pm
by Bill Bowley
David,

Many thanks for the warm welcome! ;)

Stuart,

Thanks for the advice! I would think coming from Charlie and through you it is definitely of value! :)

Re: Behringer FCB1010 with an Alesis Quadraverb GT?

PostPosted: Mon Nov 30, 2009 6:11 pm
by KenE
Bill

Have you got the kit and connected the FCB1010 to the Quadraverb?

If so, can you share the results? I have the kit and would like to do the same.

Thanks

Ken E

Re: Behringer FCB1010 with an Alesis Quadraverb GT?

PostPosted: Mon Nov 30, 2009 10:51 pm
by Bill Bowley
Ken,

Sorry mate, progress has been a bit slow in that department of late! I've just taken delivery of a Samson Powerbrite Pro 10 unit and I'm in the (slow) process of rebuilding my 'rack' to accomodate that at the moment. I have got the FCB1010 'out of storage' at least, so that's a start -I'll post a progress report on this thread once I get some results! :o

Re: Behringer FCB1010 with an Alesis Quadraverb GT?

PostPosted: Tue Dec 01, 2009 5:31 am
by Bill Bowley
Ken,

Hooked up and working in direct mode to select the patches, have yet to sort out the 'pedals', I'll see how it goes controlling the pre-amp volume at first.
;)
Regards

Re: Behringer FCB1010 with an Alesis Quadraverb GT?

PostPosted: Tue Dec 01, 2009 10:28 am
by KenE
Thanks, Bill. Looks like I am running out of excuses not to try it myself!