Anything to do with Fender, Burns and other guitars; also amps, effects units including eTap, plus any other music making accessories
Moderators: David Martin, dave robinson, Iain Purdon, George Geddes
by OLDEREK » Wed Nov 11, 2009 8:03 pm
-
OLDEREK
-
by BarryH » Wed Nov 11, 2009 11:50 pm
Made quite a few, all normal material though, some three ply but mostly single ply white.
You can get patterns for most scratchplates on the net and it's quite easy to make a template to use with a router. The places that sell small sheets tend to overprice them and, unless you buy larger sheets, it's getting as it's easier to buy ready made.
Cheers
Barry
-
BarryH
-
by ecca » Thu Nov 12, 2009 9:07 am
My Dad made me a scratchplate , brass and chromed, beautiful.
We played on the tele and I noticed in the studio that when I caught the light with it it blacked all the monitor screens out.
The technicians then sprayed the guitar ( Colorama) with a sort of wax which not only stopped the glare but damped all the strings, all the tone went.
Happy days.
-
ecca
-
by keithmantle » Thu Nov 12, 2009 10:44 am
And a couple of nice stools !!!
-
keithmantle
-
- Posts: 1466
- Joined: Mon Oct 26, 2009 5:26 pm
- Location: Codsall South Staffordshire
- Full Real Name: keith george mantle
by Geoff Alderton LH » Thu Nov 12, 2009 3:24 pm
Hi Derek. I did think about making one when I started to get the bits together for a Left Handed version of the black Strat that Hank used from the summer of 1972 up to late 1981. Finding the correct 5 ply material B/W/B/W/B for the pick guard proved to be a problem. I eventualy called WD Music UK who said no problem, our pick guard custom shop in the States will make you one. Six weeks later it arrived and its perfect. Same price as their standard pick guards no extra for a custom left handed one off job. Just incase you are thinking why didnt I get a black Fender pick guard, the reason is they dont do the five ply in any version, left or right handed.
So the answer to your question Derek is no, but I nearly did.
Regards Geoff.
-
Geoff Alderton LH
-
by OLDEREK » Thu Nov 12, 2009 3:51 pm
I had a look around the internet sites last night that made Pickguards to order, and I think it's the best idea to let them make one for you, unless you can get a ready made one that suits you, below is how I started covering the brass with masking tape and drawing around a old pickguard......
- PG 1.JPG
- (25.28 KiB) Downloaded 7683 times
- PG 2.JPG
- Before Gold plating
- (38.18 KiB) Downloaded 7683 times
-
OLDEREK
-
by ecca » Thu Nov 12, 2009 5:33 pm
keithmantle wrote:And a couple of nice stools !!!
The left hand Vox AC 15 is currently in the possession of Amanda and sounds fantastic, ask Robbo.
Mine, the one I'm sitting on was swapped for a record player in 1969 !
-
ecca
-
Return to Gear
Who is online
Users browsing this forum: Bomah, Google Adsense [Bot], John Boyd and 18 guests