Anything to do with Fender, Burns and other guitars; also amps, effects units including eTap, plus any other music making accessories
Moderators: David Martin, dave robinson, Iain Purdon, George Geddes
by BrianD » Sat Oct 24, 2009 11:29 am
I have a Q2 programmed by Charlie which is in great condition and working wonderfully well. I never got round to getting any form of floor controiller to help move between the different settings. Can anyone recommend a suitable controller and advise whether this requires any szetting up or just plug in and go?
Thanks
Brian
-
BrianD
-
- Posts: 283
- Joined: Tue Sep 29, 2009 6:09 am
- Full Real Name: Brian Dandridge
by Tab » Sat Oct 24, 2009 1:27 pm
Brian,
give me a ring - I can't find your number
890891
-
Tab
-
- Posts: 624
- Joined: Wed Sep 16, 2009 4:22 pm
- Location: East Sussex
- Full Real Name: Terry Bryant
by John M » Sat Oct 24, 2009 4:53 pm
You could use a MIDI pedal, but they can be pricey.
What I did was copy the patches to the page 2 extra memory slots on my Q2 (Charlies are in the 01 section..the first 100 slots) in my running order and then just use a bog standard foot swich to change patches...the non latching switches are around the £10 mark.
-
John M
-
- Posts: 276
- Joined: Thu Sep 17, 2009 9:52 pm
- Location: glasgow, scotland
- Full Real Name: john miller
by BrianD » Sat Oct 24, 2009 5:16 pm
Thanks, guys. Terry brought me round his old midi floor controller an dthat is driving it perfectly. Problem solved. Many thanks
Brian
-
BrianD
-
- Posts: 283
- Joined: Tue Sep 29, 2009 6:09 am
- Full Real Name: Brian Dandridge
Return to Gear
Who is online
Users browsing this forum: No registered users and 18 guests