Anything to do with Fender, Burns and other guitars; also amps, effects units including eTap, plus any other music making accessories
Moderators: David Martin, dave robinson, Iain Purdon, George Geddes
by jimuc » Tue Jan 03, 2012 10:37 pm
I am thinking of replacing the valves in my AC15Heritage with Electro-Harmonix.
Will the amp Bias have to be adjusted if I change them
Any help will be appreciated
Many Thanks
Jim
Never nail a door shut that you may want to go back through
-
jimuc
-
- Posts: 292
- Joined: Wed Sep 16, 2009 9:31 pm
- Location: South Ayrshire, Scotland
- Full Real Name: Jim Dunlop
by rogera » Wed Jan 04, 2012 9:54 am
Jim like most if not all Vox amps there is no adjustment necessary for valve bias.
The AC15 Hereitage uses fixed cathode bias for the output valves.
-
rogera
-
- Posts: 1087
- Joined: Wed Sep 16, 2009 1:06 pm
- Location: South West
- Full Real Name: Roger Allcock
-
by keithmantle » Wed Jan 04, 2012 10:40 am
Hi Jim, I replaced them in my AC15 Heritage with(El Harm) no problem, I bought them from Voc-rock guitars who were cheaper than Watford
-
keithmantle
-
- Posts: 1466
- Joined: Mon Oct 26, 2009 5:26 pm
- Location: Codsall South Staffordshire
- Full Real Name: keith george mantle
by jimuc » Wed Jan 04, 2012 2:56 pm
Hi Roger and Keith
Thanks both for your prompt replies.
It's good to know that no adjustment is required.
Yes Keith I was on the Voc-roc website last night and their prices seemed very reasonable.
Once again thank you both
JIM
Never nail a door shut that you may want to go back through
-
jimuc
-
- Posts: 292
- Joined: Wed Sep 16, 2009 9:31 pm
- Location: South Ayrshire, Scotland
- Full Real Name: Jim Dunlop
Return to Gear
Who is online
Users browsing this forum: No registered users and 78 guests