Mighty Mite Necks

Anything to do with Fender, Burns and other guitars; also amps, effects units including eTap, plus any other music making accessories

Moderators: David Martin, dave robinson, Iain Purdon, George Geddes

Mighty Mite Necks

Postby John Boyd » Wed Nov 25, 2009 10:41 am

Has anyone had any experience with Mighty Mite necks?
I've been looking for a birdseye maple neck for a project and came across one on the dreaded 'bay'.
All comments welcomed.
Cheers,
JB
John Boyd
 
Posts: 466
Joined: Wed Sep 16, 2009 6:36 pm
Location: New Zealand
Full Real Name: John Boyd

Re: Mighty Mite Necks

Postby RogerCook » Wed Nov 25, 2009 12:05 pm

Hi

I have a Mighty Mite Strat neck and I'm happy with it. It's a rosewood board and it just needed a bit of tidying up of the fret ends. I don't know what the birdseye neck would be like but look carefully at how it is built. Some have a separate birdseye fingerboard rather than being one piece.

Roger
RogerCook
 
Posts: 498
Joined: Thu Sep 17, 2009 9:56 am
Full Real Name: Roger Cook

Re: Mighty Mite Necks

Postby ecca » Wed Nov 25, 2009 2:15 pm

Mine's a beauty on the Cakeocaster.
Maple neck, ebony fretboard, big fat frets.
Love it, the ash body's Mighty Mite too.
Love it, love it, love it.
Ecca
Last edited by ecca on Thu Nov 26, 2009 12:10 am, edited 1 time in total.
ecca
 

Re: Mighty Mite Necks

Postby neil2726 » Wed Nov 25, 2009 7:41 pm

Careful hankies - Ecca's gettin excited! :D
neil2726
 
Posts: 1054
Joined: Wed Sep 16, 2009 3:36 pm
Full Real Name: Neil Sutton

Re: Mighty Mite Necks

Postby Amanda » Wed Nov 25, 2009 9:50 pm

Don't worry Neil,

We have a bucket of cold water standing by! :lol:

Amanda
[Check Out My Meazzi Site: http://www.meazzi.org.uk
And Tape Echo Forum: http://ac15.org.uk/meazzibbs/index.php

You're Never Alone With A Mitzi!
User avatar
Amanda
 
Posts: 967
Joined: Sat Sep 12, 2009 11:55 am
Full Real Name: Amanda Hambidge

Re: Mighty Mite Necks

Postby peter roest » Wed Nov 25, 2009 10:43 pm

A one piece maple neck you can recognize. If you look at the back side of the neck and you see an inlay (mostly brown) strip it's a one piece maple neck. If there is no inlay strip, it has an separate fingerboard. The reason is the metal bar in the neck to adjust the neck bending. In case of an separate fingerboard the bar is mounted from the fingerboard side, before the fingerboard is mounted. In the other case it is mounted from the backside, you need there an inlay strip.

Peter
peter roest
 

Re: Mighty Mite Necks

Postby RogerCook » Thu Nov 26, 2009 12:02 am

Hi Peter

The "skunk stripe" on the back of the neck is not necessarily an indication that it's a one piece neck. It may still have a separate fingerboard. The only way to tell is to check for a glue line at the fingerboard edge or transition into the headstock (often difficult in a photograph) or a change in grain pattern.

Roger
RogerCook
 
Posts: 498
Joined: Thu Sep 17, 2009 9:56 am
Full Real Name: Roger Cook

Re: Mighty Mite Necks

Postby Didier » Thu Nov 26, 2009 10:22 am

John Boyd wrote:All comments welcomed.

Here is an example of a Mighty Mite birdseye maple Strat neck :

Image

The Fender decal is an add-on (not provided with the neck).

Didier
User avatar
Didier
 
Posts: 1942
Joined: Tue Sep 15, 2009 10:57 am
Location: West suburb of Paris, France
Full Real Name: Didier Parot

Re: Mighty Mite Necks

Postby steelystrings » Sun Dec 06, 2009 11:27 am

I have used a Mighty Mite neck for a couple of years on a guitar I put together myself based on parts supplied by online shops. I think they are well finished and I have had no problems, and consider it good value for money.

Steve.
steelystrings
 


Return to Gear

Who is online

Users browsing this forum: No registered users and 31 guests

Ads by Google
These advertisements are selected and placed by Google to assist with the cost of site maintenance.
ShadowMusic is not responsible for the content of external advertisements.